Broil-Mate Knobs and Handles

10070-E13A Stainless steel lid handle with rubber holding area that replaces resin lid handle 30230230; includes mounting brackets and two screws.

Note: Part 10070-E13A is the factory authorized replacement for the following parts, which are no longer available:

• OMC:30230230

MORE...

10184-E124 Handle heat shield installs onto the body of the grill before installing the handle. (Used with handle 24005-12AB when replacing handle 10184-70). MORE...

10184-E39 HANDLE HEAT SHIELD 3B + MORE...

10184-E704 OEM HANDLE W/STRAP EVOLUTION 400 has been discontinued and replaced with handle 24005-12AB and handle heat shield 10184-E124. When ordering 10184-E704, your order will contain the two replacement part numbers. MORE...

10184-E704A HANDLE W/STRAP EVOLUTION 400 * Discontinued by Broil-Mate.

Note: Part 10184-E704A is the factory authorized replacement for the following parts, which are no longer available:

• 10184-E704

MORE...

10239-390 Phenolic handle stand-off for left hand side.
Temporarily out of stock. Orders for this part will ship late May. MORE...

10239-391 Phenolic handle stand-off for right hand side. MORE...

10239-6 Handle washer, 1/8in. Discontinued by Broil-Mate. See replacement part 10239-7. MORE...

10239-7 Triangular handle washer. 1/8 in thick. Made of heat resistant compressed material.

Note: Part 10239-7 is the factory authorized replacement for the following parts, which are no longer available:

• OMC:10239-6

MORE...

10338-143 Genuine OEM lid handle. Discontinued by Broil-Mate. See replacement part 10338-145A. MORE...

10338-145 Genuine OEM lid handle. Discontinued by Broil-Mate. MORE...

10472-71-2 KNOB SIDE BURNER MORE...

10472-E38 CONTROL KNOB - BEZEL BLK MORE...

10472-K231 Control knob small. Black with stainless steel BA strip. MORE...

10472-K36 Genuine OEM control knob.

• Off position D-Value: 6 o'clock
• Knob diameter: 1 5/8"
• Socket diameter: 5/16"
• Knob shaft: 1/2" MORE...

10472-K37 Genuine OEM control knob.

• Off position D-Value: 6 o'clock
• Knob diameter: 2 1/4"
• Socket diameter: 5/16"
• Knob shaft: 1/2"

Discontinued by Broil-Mate. See replacement part 10472-K431.

Note: Part 10472-K37 is the factory authorized replacement for the following parts, which are no longer available:

• OMC:10472-K37UN

MORE...

10472-K40 Genuine OEM rotary igniter knob. MORE...

10472-K431 Control knob large. Black with stainless steel BA strip. MORE...

18000 Genuine OEM control knob. Set of two.

• Off position D-Value: 6 o'clock
• Knob diameter: 2 1/4"
• Socket diameter: 5/16"
• Knob shaft: 1/2" MORE...

21475-138 DOOR HANDLE RESIN * MORE...

22001-668 Genuine OEM small control knob.

• Off position D-Value: 6 o'clock
• Knob diameter: 1 7/8"
• Socket diameter: 5/16"
• Knob shaft: 1/2" MORE...

22001-704 Genuine OEM control knob assembly. Discontinued by Broil-Mate. MORE...

22001-768 Genuine OEM large control knob.

• Off position D-Value: 6 o'clock
• Knob diameter: 2 1/4"
• Socket diameter: 5/16"
• Knob shaft: 1/2" MORE...

22002-904 Genuine OEM control knob bezel.

• Outer dameter: 2 15/16"
• Inner diameter: 2 3/8"
• Mounting holes: 1 1/16 in one direction, 1 3/8" in the other direction MORE...

22002-96 Genuine OEM silver control knob.
There has been some confusion regarding the knob part numbers caused by revisions by the manufacturer. Basically, for the models whose owners manual shows part# 22002-966 or 22002-968, pick 22002-96 if you need a silver knob; pick 22002-966 if you need a black knob.

• Off position D-Value: 6 o'clock or 12 o'clock (no on/off mark)
• Knob diameter: 2 1/4"
• Socket diameter: 8mm
• Knob shaft: 1/2 inch MORE...

22002-968 Genuine OEM black control knob. Discontinued by Broil-Mate. MORE...

22004-96 CONTROL KNOB CHROME - SMALL MORE...

24005-12A LID-HANDLE BENT 500 430 SS. NOTE: The mounting holes, center to center, are 23 1/2" apart.

Note: Part 24005-12A is the factory authorized replacement for the following parts, which are no longer available:

• OMC:24005-134

MORE...

24005-12AB Lid handle bent 500 assembly. Mounting holes center to center about 23 5/8". (Used with handle heat shield 10184-E124 when replacing handle 10184-E70.) MORE...

24005-134 Genuine OEM stainless steel Lid Handle. Mounting holes are 23 3/4" on center. Discontinued by Broil-Mate. See replacement part 24005-12A. MORE...

25960 Universal control knobs, set of two knobs, includes eight (8) shaft inserts to accomodate valve stem diameters of approximately 5/6" and 1/4".

• Off position D-Value: 12 or 6 or 3 or 9 o'clock
• Knob diameter: 2 3/16"
• Insert socket diameters: 8.25mm (.32") and 6.10mm (.24")
• Knob shaft: Flat or 1"

Note: Part 25960 is the factory authorized replacement for the following parts, which are no longer available:

• OMC:22002-96
• OMC:472-C501
• OMC:472-C552
• OMC:472-C555
• OMC:472-C562
• OMC:472-C565

MORE...

26005-305 HANDLE INSERT-REGAL 440/500 * MORE...

30230228 Black lid handle. Fits older GrillPro and other models which use a half-handle that is 10 3/4" long. Requires 8 3/4" mounting holes, center to center. Discontinued by Broil-Mate. MORE...

30230230 HANDLE FRONT CASTING 1/2 BARREL Discontinued by Broil-Mate. See replacement part 10070-E13A. MORE...

338-C500 LID HANDLE 4B GPB MORE...

338-C503 LID HANDLE GPB (Has 1 1/4" diameter and center to center mounting holes is about 18 7/8".) Discontinued by Broil-Mate. MORE...

472-C500 Genuine OEM control knob bezel. Discontinued by Broil-Mate. MORE...

472-C501 Control knob.

• Off position D-Value: 6 or 12 o'clock
• Knob diameter: 2 1/8"
• Socket diameter: 5/16"
• Knob shaft: None MORE...

50479-168 KNOB GAS VALVE SMALL MORE...

PB20-60 S/B LID HANDLE WAGON ENCLOSER* MORE...

SP11-7 KNOB VALVE LARGE MORE...